The Can-Am Commander raise equipment opens a world of exhilarating potentialities, reworking your trip into a strong off-road machine. This complete information dives deep into the fascinating world of raise kits, from understanding their varied varieties and elements to the set up course of and essential upkeep steps. Uncover the efficiency enhancements, security concerns, and in the end, how to decide on the proper raise equipment to raise your Can-Am Commander expertise.
From exploring rugged terrains to conquering difficult obstacles, a raise equipment equips your Can-Am Commander with the improved capabilities you want. This exploration covers the important features of selecting, putting in, and sustaining a raise equipment, guaranteeing your off-road journey is as easy and secure as doable.
Introduction to Can-Am UTV Elevate Kits
A Can-Am UTV raise equipment is a vital improve for enhancing the efficiency and capabilities of your side-by-side. These kits elevate the automobile’s trip top, offering quite a few advantages for off-road adventures and navigating difficult terrains. This complete information explores the different sorts, benefits, and potential drawbacks of putting in a raise equipment in your Can-Am.This improve permits for improved floor clearance, offering extra stability and management throughout demanding off-road excursions.
It additionally usually enhances the aesthetic attraction of your machine. A well-chosen raise equipment will optimize your automobile’s functionality for conquering powerful terrain.
Sorts of Elevate Kits
Elevate kits can be found in varied designs, every impacting the trip and dealing with of your Can-Am. Understanding the completely different choices is significant to creating an knowledgeable determination.
- Spring Elevate Kits: These kits usually contain changing the prevailing springs with longer, stronger ones. This strategy affords a extra simple and infrequently extra budget-friendly technique to enhance trip top. The profit lies in its relative simplicity, whereas the draw back might be a barely harsher trip in comparison with coil-over choices.
- Coil-Over Elevate Kits: Coil-over raise kits present larger customization and adjustability. They characteristic shocks which might be mounted on coil springs, enabling exact management over the suspension’s traits. The advantages embrace a smoother trip and improved dealing with, particularly in demanding off-road situations. Nevertheless, the added complexity usually ends in a better value level.
Advantages of Putting in a Elevate Equipment
A number of benefits accrue from putting in a raise equipment in your Can-Am UTV. These enhancements considerably improve the automobile’s functionality and efficiency.
- Elevated Floor Clearance: A taller trip top affords extra space between the automobile’s undercarriage and the terrain. That is important for tackling obstacles like rocks, logs, and uneven surfaces. For instance, a raise equipment permits a person to drive over a bigger number of terrain, enhancing general efficiency.
- Enhanced Off-Street Functionality: Elevated floor clearance interprets to improved stability and management in difficult off-road environments. This enchancment instantly impacts the general efficiency, particularly when negotiating tough terrain.
- Improved Look: A lifted Can-Am usually presents a extra aggressive and highly effective aesthetic, interesting to fanatics looking for a personalised look. This aesthetic enchancment is often a significant factor in selecting a raise equipment.
Potential Drawbacks or Issues
Whereas raise kits supply substantial advantages, it is essential to acknowledge potential drawbacks and concerns. Cautious planning is essential to a profitable improve.
- Elevated Value: Elevate kits can vary in value relying on the model, kind, and options. Greater-end coil-over kits are sometimes dearer than less complicated spring raise kits.
- Potential Impression on Trip High quality: Some raise kits, notably spring-based ones, would possibly introduce a harsher trip in comparison with the inventory suspension. This issue needs to be fastidiously evaluated earlier than committing to an improve.
- Suspension Modifications: A raise equipment necessitates modifications to the automobile’s suspension elements. These adjustments require cautious consideration to make sure the modifications are carried out accurately and safely.
Elevate Equipment Model Comparability
This desk offers a concise overview of various raise equipment manufacturers and their options. This comparability aids in choosing the proper raise equipment on your Can-Am.
| Model | Kind | Key Options | Value Vary (estimated) |
|---|---|---|---|
| Model A | Spring | Easy design, budget-friendly | $500-$800 |
| Model B | Coil-Over | Adjustable shocks, smoother trip | $800-$1500 |
| Model C | Spring | Sturdy building, long-lasting | $600-$1000 |
Elevate Equipment Elements: Can-am Commander Elevate Equipment
Unleash the beast inside your Can-Am UTV! A raise equipment is not nearly aesthetics; it is about enhancing efficiency and functionality. This part delves into the essential elements of a raise equipment, their features, and the way they collectively elevate your off-road journey.Understanding the elements is essential to making sure a easy and profitable set up. Selecting the best raise equipment on your particular wants and automobile is significant, and understanding what every part does and the way it suits into the general system is equally essential.
This empowers you to make knowledgeable selections and maximize the potential of your upgraded machine.
Key Elements
A well-rounded raise equipment usually consists of a number of important components. These are essential for growing floor clearance, bettering suspension journey, and boosting general automobile efficiency. Every part performs a significant position within the enhanced capabilities of your UTV.
- Suspension Elements: These are the guts of the raise equipment, together with upgraded springs, shocks, and typically even new management arms. Stronger, longer springs present elevated suspension journey, absorbing bumps and obstacles with larger ease. Upgraded shocks dampen the influence of these bumps, guaranteeing a extra comfy trip even over tough terrain. In some instances, management arms are wanted to accommodate the elevated suspension journey and keep correct geometry.
- Elevate Blocks or Spacers: These are usually positioned between the body and the prevailing suspension elements to create extra space for taller tires. They enhance the automobile’s trip top, creating extra floor clearance. The peak of the spacers is important to the general raise top of the automobile.
- Wheels and Tires: Bigger tires are sometimes essential to accommodate the elevated floor clearance. Bigger diameter wheels are sometimes paired with bigger tires to maximise the raise equipment’s potential. The right tire dimension and wheel width are important to sustaining automobile steadiness and dealing with.
- Different Elements: Some kits might embrace new mounting brackets, bump stops, or different supporting elements to make sure the integrity and stability of the automobile underneath heavy use. These make sure the raise equipment features easily, whereas minimizing stress on different components of the automobile.
Practical Breakdown
Every part contributes to the general efficiency enhancement. The interaction of those elements ensures a easy and highly effective trip.
- Suspension Enhancement: Upgraded springs and shocks are important for dealing with tough terrain. The elevated suspension journey offers a smoother trip and higher dealing with, which instantly correlates to elevated stability and management.
- Elevated Floor Clearance: The raise equipment will increase the gap between the automobile’s body and the bottom. That is essential for navigating obstacles and tough terrain, lowering the danger of bottoming out. Greater floor clearance permits for assured driving in difficult situations.
- Enhanced Tire Clearance: Bigger tires, accommodated by the raise equipment, present higher traction and stability. The elevated contact patch on the bottom interprets to improved grip and dealing with on completely different surfaces. Improved traction is instantly correlated with enhanced efficiency.
Typical Measurements
A desk outlining typical raise heights and tire dimension compatibility is offered under. This info helps decide the right raise equipment on your wants. Completely different kits have completely different specs, so at all times seek the advice of the producer’s tips.
| Elevate Peak (inches) | Typical Tire Dimension Compatibility |
|---|---|
| 2-4 | 33-35 inches |
| 4-6 | 35-37 inches |
| 6-8 | 37-40 inches |
Set up Significance
Correct set up is paramount for the longevity and efficiency of your raise equipment. Comply with the producer’s directions meticulously. Incorrect set up can result in varied points, together with untimely put on and tear, decreased dealing with, and even potential harm to the automobile.
- Producer Directions: At all times consult with the producer’s directions for correct set up procedures.
- Skilled Set up: Take into account skilled set up for advanced raise kits to make sure right alignment and performance. Skilled set up ensures correct alignment and performance.
- High quality Elements: Use high-quality elements to keep away from points throughout operation and keep long-term efficiency.
Efficiency Enhancement
Elevate kits contribute to elevated efficiency by bettering floor clearance, tire dimension, and suspension journey. This instantly interprets to enhanced functionality in varied terrain situations.
- Improved Dealing with: Enhanced suspension journey and stability end in improved dealing with, even at excessive speeds.
- Elevated Functionality: Greater floor clearance and bigger tires enhance your potential to navigate difficult terrain.
- Enhanced Sturdiness: Correct set up and high-quality elements contribute to the general sturdiness of the automobile.
Set up Procedures and Issues
Remodeling your Can-Am UTV with a raise equipment is a rewarding course of, however meticulous consideration to element is essential. Correct set up ensures a secure, dependable, and aesthetically pleasing improve. This part offers a complete information to the set up process, highlighting important steps and concerns.
Step-by-Step Set up Process
A methodical strategy to set up is essential to a profitable consequence. This detailed process ensures the raise equipment is put in accurately, maximizing its advantages and minimizing potential issues.
- Preparation and Evaluation: Totally examine your Can-Am UTV and the raise equipment elements. Verify all components are current and in good situation. Guarantee the prevailing suspension elements are in optimum working order, and test for any harm. Take photographs of the present setup to help within the reversal course of if wanted. This step ensures you have got all mandatory supplies and avoids potential points throughout the set up course of.
- Part Identification and Group: Rigorously establish all of the raise equipment elements. Arrange the elements logically to take care of an organized workspace. Detailed labeling is important to forestall errors. This proactive step will decrease confusion and make sure the right components are utilized in the best place.
- Suspension Part Substitute: Comply with the producer’s directions for changing the suspension elements. This step normally entails eradicating the outdated elements and attaching the brand new, upgraded ones. Use warning when dealing with springs and shocks, as they are often underneath stress.
- Body Modification (if relevant): Some raise kits might require body modifications. Seek the advice of the producer’s directions fastidiously and make the most of the offered templates. If wanted, this step would possibly contain chopping and welding, so guarantee the mandatory experience is on the market.
- Set up of New Elements: Set up the brand new raise equipment elements, reminiscent of management arms, shocks, and steering elements. Guarantee exact alignment to take care of correct performance and steering accuracy. This step usually entails torque specs, so seek the advice of the producer’s directions fastidiously.
- Alignment and Adjustment: After set up, meticulously test the alignment of all suspension elements. Guarantee every little thing is correctly aligned and adjusted to forestall any points with dealing with and driving. Correct alignment prevents potential harm to the automobile and maximizes driving efficiency.
- Closing Inspection and Testing: Conduct a radical visible inspection of your complete set up. Confirm all connections are safe and that every one elements operate accurately. This last step consists of testing the automobile’s trip high quality and dealing with. Pay shut consideration to any uncommon noises or vibrations.
Instruments and Supplies Wanted
Correct instruments are important for secure and environment friendly set up.
- Numerous wrenches (socket units, open-end, and adjustable)
- Torque wrench (important for correct tightening)
- Screwdrivers (Phillips and flathead)
- Pry bars (for eradicating outdated elements)
- Jack stands and jack
- Measuring instruments (tape measure, degree)
- Security glasses and gloves
- Lifting gear (if mandatory)
- Work gloves and security glasses
- A complete set of manufacturer-recommended instruments.
Significance of Following Producer’s Directions
Adherence to the producer’s directions is paramount. These directions are developed to make sure the raise equipment’s optimum efficiency and security. Deviations from the beneficial procedures may end up in compromised automobile integrity. At all times prioritize the producer’s tips.
Potential Points and Troubleshooting
Throughout set up, varied points would possibly come up. Addressing them promptly is significant to forestall additional issues.
- Part Misalignment: Misalignment could cause dealing with points and untimely put on. Confirm alignment at every step and regulate as wanted.
- Improper Torque: Incorrect torque can result in free connections and potential part failure. At all times use a torque wrench to make sure right tightening.
- Incorrect Set up: Following the producer’s directions fastidiously is essential. Any deviation can result in vital issues.
- Suspension Points: Take note of any uncommon noises or vibrations, as they could point out a suspension downside.
- Leakage: Test for any leaks within the hydraulic system. Addressing these promptly can stop main points. Often test fluid ranges and high up as wanted.
Set up Process Abstract Desk
| Step | Description |
|---|---|
| 1 | Preparation and Evaluation |
| 2 | Part Identification and Group |
| 3 | Suspension Part Substitute |
| 4 | Body Modification (if relevant) |
| 5 | Set up of New Elements |
| 6 | Alignment and Adjustment |
| 7 | Closing Inspection and Testing |
Efficiency Enhancements and Modifications
A raise equipment is not nearly aesthetics; it is a gateway to enhanced efficiency and a extra succesful Can-Am UTV. Correctly applied, it unlocks a world of potentialities for conquering difficult terrain and pushing your machine’s limits. This part delves into the tangible enhancements a raise equipment brings to your off-road expertise.Lifting your Can-Am UTV elevates its capabilities in a number of essential methods.
From tackling steeper inclines to navigating rougher trails, a raise equipment is your key to a extra adventurous and rewarding trip. By strategically growing floor clearance and strategy angles, you achieve a big benefit over obstacles that may in any other case impede your progress.
Improved Floor Clearance and Method Angles
Elevate kits instantly influence your UTV’s potential to sort out obstacles. Elevated floor clearance means your automobile’s undercarriage is farther from the bottom, successfully clearing rocks, roots, and different obstacles. The next strategy angle means that you can climb inclines with a gentler angle, lowering the danger of getting caught or slowed down. This interprets to extra confidence and management when navigating demanding terrain.
Results of Completely different Elevate Equipment Heights on Efficiency
The peak of the raise equipment instantly influences efficiency. Greater raise kits typically supply extra floor clearance and strategy angles, however this will additionally have an effect on the UTV’s dealing with and stability. A average raise equipment offers a noticeable enchancment in functionality with out sacrificing an excessive amount of in dealing with. A considerable raise equipment might supply most floor clearance however might necessitate modifications to make sure stability and management.
A balanced strategy is essential. Take into account the terrain you often encounter and the modifications you are prone to make.
Impression of Elevate Kits on Dealing with and Stability, Can-am commander raise equipment
Elevate kits, whereas growing floor clearance, can influence dealing with and stability if not fastidiously thought-about. A poorly executed raise equipment may end up in a much less predictable and secure UTV, resulting in a much less pleasing trip. Correctly designed raise kits, nonetheless, deal with this concern by strengthening the automobile’s suspension elements. This counteracts the results of a better middle of gravity, sustaining stability and dealing with traits.
Skilled off-roaders know the significance of sustaining balanced efficiency throughout all features of the automobile.
Modifications Complementing a Elevate Equipment
A raise equipment usually necessitates complementary modifications for optimum efficiency. Tires, for instance, are a vital side. A bigger tire dimension with acceptable tread patterns can considerably improve traction and grip on varied terrains. Sturdy bumpers, designed to resist impacts and supply safety, are additionally essential. These modifications can additional improve the automobile’s capabilities and supply enhanced security.
Appropriate Tire Sizes for Completely different Elevate Equipment Heights
| Elevate Equipment Peak (in) | Advisable Tire Dimension (Instance) |
|---|---|
| 2 | 28×10-12 |
| 3 | 30×10-12 |
| 4 | 32×12.5-12 |
| 5 | 34×12.5-12 |
This desk offers a common guideline for tire sizes. At all times seek the advice of your automobile’s specs and the producer’s suggestions for exact sizing and compatibility. Bear in mind, the only option is determined by the particular terrain you plan to sort out. Take into account the compromise between floor clearance and tire dimension to make sure a harmonious steadiness.
Security and Upkeep
Lifting your Can-Am UTV to new heights is thrilling, however security and correct upkeep are paramount. Neglecting these features can result in expensive repairs, potential accidents, and even catastrophic failures. A well-maintained lifted UTV is not going to solely carry out higher but additionally present a safer and extra pleasing trip.
Security Precautions Throughout Set up
Cautious planning and execution are essential throughout raise equipment set up. Improper set up can result in harm to the automobile’s body, suspension, and elements, and compromise the structural integrity of the UTV. Guarantee all mandatory instruments and gear can be found, and the work space is evident of obstructions. At all times seek the advice of the raise equipment producer’s directions for particular security tips.
- Put on acceptable private protecting gear (PPE), together with security glasses, gloves, and durable work boots. This protects in opposition to flying particles and potential accidents.
- Work in a well-lit space with satisfactory house. A cluttered or darkish workspace will increase the danger of accidents.
- Comply with the producer’s directions meticulously. Deviations can compromise the integrity of the raise equipment and automobile.
- Guarantee correct jacking procedures are adopted to forestall automobile harm. Use a correct jack stand to assist the automobile’s weight.
Potential Security Hazards
A number of hazards can come up throughout raise equipment set up and operation. Understanding these hazards is important for stopping accidents.
- Free or Broken Elements: Free bolts, nuts, or broken components could cause surprising failures and result in extreme accidents.
- Improper Lifting Procedures: Utilizing improper lifting methods or gear can harm the UTV’s body or suspension.
- Overloading: Carrying extreme weight past the automobile’s capability, particularly after a raise equipment set up, can compromise security.
- Incorrect Tire Strain: Utilizing the mistaken tire stress could cause a lack of management or tire harm. Seek the advice of the producer’s suggestions.
Advisable Upkeep Procedures
Common upkeep is important for preserving the integrity of a lifted Can-Am UTV and its raise equipment.
- Common Lubrication: Lubricate all suspension elements, together with ball joints, shock absorbers, and pivot factors, in accordance with the producer’s suggestions. This ensures easy operation and prolongs part life.
- Inspection of {Hardware}: Often examine all bolts, nuts, and fasteners for tightness and put on. Change any broken or free elements promptly. A radical visible test of the raise equipment’s {hardware} is important.
- Alignment Test: Have the automobile’s alignment checked periodically, particularly after a raise equipment set up. This ensures optimum dealing with and reduces the danger of tire put on.
- Fluid Checks: Often test all fluids, together with engine oil, transmission fluid, and brake fluid, and high up as wanted. It will assist guarantee easy operation and prolong the lifetime of the elements.
Significance of Common Inspection
Common inspection of raise equipment elements helps establish potential issues earlier than they escalate. This proactive strategy can stop expensive repairs and guarantee continued secure operation.
- Early Detection: Inspecting elements recurrently permits for early detection of potential points, stopping expensive repairs.
- Proactive Upkeep: Addressing issues early ensures the automobile operates reliably and effectively.
- Security Assurance: Guaranteeing correct performance of all elements promotes security.
Upkeep Activity Frequency
This desk offers a suggestion for the frequency of varied upkeep duties for a lifted Can-Am UTV. Alter these based mostly in your driving habits and situations.
| Upkeep Activity | Frequency |
|---|---|
| Test tire stress | Weekly |
| Lubricate suspension elements | Each 500 miles |
| Examine bolts and fasteners | Month-to-month |
| Test fluid ranges | Month-to-month |
| Alignment test | Each 5000 miles or as wanted |
| Thorough inspection of raise equipment | Each 1000 miles |
Selecting the Proper Elevate Equipment
Choosing the proper raise equipment on your Can-Am Commander is a vital determination. It is not nearly aesthetics; it instantly impacts your trip’s efficiency, utility, and longevity. Understanding the components concerned empowers you to make an knowledgeable alternative that aligns together with your particular wants and needs.A well-chosen raise equipment can remodel your Commander right into a extra succesful and pleasing machine.
The precise raise equipment offers the mandatory floor clearance, enhances stability, and optimizes efficiency on your meant use. However deciding on the perfect raise equipment requires cautious consideration of a number of components, which we are going to discover within the following sections.
Elements to Take into account When Selecting a Elevate Equipment
A raise equipment is not a one-size-fits-all answer. Your alternative relies upon closely in your price range, desired raise top, and meant use. As an illustration, a weekend warrior might prioritize a extra average raise for enhanced aesthetics and slight enchancment in floor clearance, whereas a severe off-road fanatic will probably need a substantial raise.
- Finances: Elevate kits range considerably in value. Take into account your price range and decide how a lot you are keen to spend. High quality elements, sturdy design, and respected manufacturers usually include a better price ticket. Store round, examine costs, and search for offers.
- Desired Elevate Peak: Elevate heights are usually measured in inches. The next raise top will increase floor clearance however can even have an effect on trip high quality and dealing with. Rigorously weigh the advantages of elevated clearance in opposition to potential compromises in trip consolation and steering responsiveness.
- Meant Use: How will you primarily use your Commander? Every day commuting, gentle off-roading, or excessive path driving every dictate completely different necessities for a raise equipment. Take into account the varieties of terrain you will encounter and the obstacles you will probably face. A raise equipment designed for every day driving is probably not fitted to rigorous off-road use.
- Suspension Elements: The standard and sturdiness of the suspension elements inside the raise equipment considerably influence its long-term efficiency and reliability. Search for kits with high-quality springs, shocks, and different elements designed to deal with the added load and stress.
Elevate Equipment Manufacturers and Fashions
Quite a few manufacturers supply raise kits for Can-Am Commanders. Researching varied manufacturers and fashions means that you can make a extra knowledgeable alternative. Reputation and buyer opinions usually present useful insights.
- Model A: Identified for its sturdy building and dependable efficiency. They provide a variety of raise equipment choices to cater to completely different wants. Their deal with high quality elements is clear of their merchandise. Count on a barely increased value level.
- Model B: A well-liked alternative for budget-conscious prospects. They supply good worth for the cash and have respectable elements. Nevertheless, efficiency is perhaps barely much less spectacular than extra premium manufacturers.
- Model C: Emphasizes off-road functionality with raise kits tailor-made for rugged terrains. Count on a value level that balances efficiency and budget-friendliness.
Evaluating Elevate Equipment Manufacturers
Selecting the best raise equipment entails a cautious comparability of varied manufacturers and fashions. Take into account the options, value, and potential efficiency enhancements.
| Model | Professionals | Cons |
|---|---|---|
| Model A | Top quality, sturdy building, wide selection of choices | Greater value level |
| Model B | Good worth for the cash, respectable elements | Probably decrease efficiency in comparison with premium manufacturers |
| Model C | Tailor-made for off-roading, able to dealing with rugged terrains | Value level is perhaps greater than budget-friendly choices |
Actual-World Examples and Opinions
Remodeling your Can-Am UTV with a raise equipment is extra than simply aesthetics; it is about unlocking an entire new degree of functionality and pleasure. Actual-world examples and buyer suggestions present invaluable insights into the efficiency, practicality, and general expertise of various raise kits. We’ll discover numerous installations, highlighting each optimistic and unfavorable experiences, that can assist you make an knowledgeable determination.
Can-Am Maverick X3 Elevate Equipment Installations
The Can-Am Maverick X3, a well-liked alternative for its versatility, has seen a surge in raise equipment installations. These modifications considerably enhance floor clearance and strategy angles, opening up alternatives for off-road adventures on difficult terrains. Many house owners report improved stability and confidence when tackling tough trails.
Detailed Descriptions of Numerous Elevate Kits
Numerous raise kits cater to completely different wants and budgets. Some kits deal with enhanced floor clearance, whereas others prioritize a extra aggressive stance. Options like shock absorbers, springs, and upgraded management arms are sometimes included, enhancing each trip high quality and efficiency. A vital side to contemplate is the compatibility of the raise equipment with the particular mannequin and 12 months of your Can-Am.
Buyer Experiences with Can-Am Elevate Kits
Buyer experiences with raise kits are assorted. Some house owners rave concerning the elevated floor clearance and enhanced off-road capabilities, permitting them to sort out beforehand inaccessible terrain. Others report noticeable enhancements in trip high quality, with smoother transitions over tough surfaces. Nevertheless, some customers have skilled points with dealing with, reminiscent of elevated physique roll or decreased steering responsiveness, which are sometimes addressed by means of cautious number of the equipment and correct set up.
Detailed Buyer Opinions (Constructive and Damaging)
Constructive opinions usually spotlight the spectacular enchancment in floor clearance and strategy angles, permitting for assured navigation of difficult trails. Clients often point out elevated stability and the flexibility to sort out beforehand unattainable terrain. Damaging opinions, alternatively, typically deal with points like elevated physique roll or steering responsiveness, which will be mitigated with correct shock absorber choice and cautious tuning.
A standard criticism entails the set up course of itself, which will be more difficult than some customers anticipated.
Evaluating Elevate Kits Based mostly on Buyer Opinions
| Elevate Equipment | Options | Constructive Opinions | Damaging Opinions |
|---|---|---|---|
| MaxxOut Elevate Equipment | Enhanced floor clearance, improved strategy angle, upgraded springs | Elevated stability, assured off-roading, noticeable enchancment in trip high quality | Potential for elevated physique roll, barely stiffer trip |
| Professional-Elevate Equipment | Sturdy building, versatile elements, budget-friendly | Stable efficiency, appropriate for varied terrain, good worth for cash | Much less noticeable enchancment in floor clearance, doubtlessly much less sturdy elements |
| Excessive Terrain Elevate Equipment | Aggressive stance, most floor clearance, high-performance elements | Unmatched floor clearance, assured dealing with on steep inclines, able to dealing with the hardest trails | Dearer, extra advanced set up course of, noticeable dealing with changes |
This desk offers a primary comparability of raise kits. It is essential to contemplate your particular wants and driving model when choosing the proper raise equipment on your Can-Am UTV.
